KLB-SYSTEM EPOXY EP 216 All-Purpose
2-Component-Epoxy-Resin-Coating and Top Sealer in one system tested according to OS 8.
KLB-SYSTEM EPOXY EP 216 All-Purpose is a solvent-free, pigmented 2-Component-Epoxy-Resin-Coating for hard industrial floor covering. KLB-SYSTEM EPOXY EP 216 All-Purpose is high-quality adjusted with excellent covering power. Due to its low viscosity the product is suitable for rolled coatings as well as a top sealer for scattered, slip resistant coatings. The material is suitable for smooth coatings for layers 1 – 4 mm. The coating material has good processing-, free-flow- and planing properties. KLB-SYSTEM EPOXY EP 216 All-Purpose has well balanced properties and may be used all-purpose. Stockage may be reduced because the product is multi-purpose and has a wide range of application possibilities. The coating is very resistant to mechanical load and different chemicals.
Application Area :
- High-quality coating for all commercially and industrially used areas like production areas, assembly halls, stockage rooms, repair shops etc. - Tested according to OS 8 for slip resistant coatings for interior areas, garages and so on.
Build-up of System
Layer in Detail
Smooth Coating OS 8-Coating (slip-resistant)
Lamination strength 1 – 4 mm 2 – 4 mm
Coating KLB-SYSTEM EPOXY EP 216 All-Purpose KLB-SYSTEM EPOXY EP 216 All-Purpose
as top sealer
Primary Layer KLB-SYSTEM EPOXY EP 216 All-Purpose
scattered with quartz sand 0.3/0.8 mm
Scratch Coat KLB-SYSTEM EPOXY EP 50 Optional for increased depth of roughness
blended with KLB-Sand Blend 2/1
Base Coat KLB-SYSTEM EPOXY EP 50 KLB-SYSTEM EPOXY EP 50
Substrate Requirements to the substrate according to the BEB-worksheets
and our detailed base coat instructions or advice by our technicians.
Layer in Detail
Decorative Scattering Adding partiColor®-Chips and subsequently sealing is suitable for the coloured design.
Apply a matt sealer finish.
Increasing the To slightly increase the slip resistance grade scatter with silicum carbide or a delustering
Slip-Resistance Grade agent or seal with the RHX-additive added.
Matting A matt surface can be achieved by additionally sealing with KLB-SYSTEM EPOXY
EP 705 E / EP 706 E or KLB-SYSTEM POLYURETHANE PU 805 E / 806 E.
Alternative Coatings Standard: KLB-SYSTEM EPOXY EP 213 or EP 220
Low-emission: KLB-SYSTEM EPOXY EP 202
Elastic: KLB-SYSTEM POLYURETHANE PU 420 or PU 421
UV-stable: KLB-SYSTEM POLYURETHANE PU 410